Hitachi DZ-HS903 Quick Operation page 8

Select "YES" by pressing d, then press the confirmation button.
Format DVD
All data will be deleted.
Format the DVD now?
YES
ENTER
(When using a DVD-RW)
The recording format selection screen appears.
Select "VR Mode" or "VF Mode" by pressing d/c, then press the
confirmation button.
Format DVD
DVD Format.
Select record format.
VR Mode
ENTER
Inserting and Removing Card
Pay attention to the orientation
of the card.
The terminals should face away
from the LCD monitor.
7
• When using a DVD-RW, proceed to
step
• When using a +RW, formatting will
start. Skip step
NO
VR Mode
After recording, you can perform various
editing functions, such as choosing or
deleting scenes. You can play back the
disc in a device that supports an 8cm
VF Mode
DVD-RW (VR Mode) after finalizing the
disc.
VF (Video) Mode
Although editing cannot be done on the
camcorder, you can play back the disc on
other DVD devices after finalizing the disc.
.
.
Always turn off the power before
inserting a card.
Open the cover.
Push the card in until it clicks into
place.
(To remove the card, push it in
slightly and release. The card will
pop up, and you can remove it.)
Always close the cover.