Hitachi DZ-HS903 Quick Operation page 13

Low Light
Allows you to record in dark
places with limited light.
Selecting a shooting
mode
During record pause, press the
1
menu button.
Select "Camera Functions
2
Setup" "Program AE"
a shooting mode.
Press A to confirm, then the
menu button to end.
The selected shooting mode
(other than Auto) appears in the
3
LCD monitor.
• The shooting mode is retained
in memory even when the
power is turned off.
Notes
• When shooting in dark places,
after-images may appear if the
subject is moving or if camera
shake occurs. Use a tripod for
best results.
• If "Sports" mode is used under
fluorescent light, the LCD
monitor may flicker. Use "Auto"
mode in this case.
HDD RAM -RW (VR) -RW (VF)
Restoring all the
Shooting Settings to
Default (Full Auto)
You can reset the following manually
adjusted shooting settings to their
defaults with the press of a single
button.
Function
Focus
Exposure
BLC (Backlight)
Program AE (shooting mode)
White Balance
EIS (Electronic Image
Stabilizer)
Microphone Filter
Full Auto button
During record pause or
recording, press the Full Auto
button.
1
"FULL AUTO" appears in the
LCD monitor for a moment and
the settings return to their
defaults.
R +RW CARD
Default
Auto
Auto
Off
Auto
Auto
On
Off
12