Hitachi DZ-HS903 Quick Operation page 2

Quick Operation (English)
Setting up the battery pack
Charging status
During charge
Charge complete
CHARGE
indicator
If the CHARGE indicator does not
light, check that the connections
( , , and
After charging is complete, attach the battery pack to the camcorder.
Removing the battery pack
1
CHARGE indicator
Lit
Unlit
) are firmly made.
Always turn the power off before
disconnecting the power supply.
While pressing and holding the PUSH
switch, slide the battery pack upward,
then remove it.
• Be careful not to drop the battery pack
while detaching it.
Note
Charging will not occur if the DC
power cord is connected.
Terminal at
bottom