Getting Started
Note: you must be connected to Wi-Fi to live stream.
Charging your Base and Tag
Dock the Tag, with buttons facing
1
up, into the Accessory Port on
the front of the Base.
Attach the Tag to the Base by
first inserting from the top, as
depicted in the graphic below.
Connecting the Base to your Tripod
For the best results, we
1
recommend mounting the Base
on a Tripod with a 3/8"
mounting screw.
If you already have a pan/tilt
head on your tripod, please
remove it prior to connecting
your Base.
If your tripod only has a ¼"
screw, use the provided Tripod
Adapter Screw.
Insert the Mini USB Charging
2
Cord into a USB outlet adapter
(not included) rated at 1.5A to
2.1A (most tablet charger
adapters) and plug it into the
Base.
Hand tighten the Base onto your
2
tripod until you feel light
resistance from the panning
motor. Avoid excessive manual
panning and tilting of the Base
motors by hand.
03
USER MANUAL
SOLOSHOT.COM
Fully charge the Base and Tag
3
prior to use. This will take about
4 hours. Charging time varies
based on USB wall adapter
rating.
NOTE
ONLY Base & Tag contain batteries
and must be recharged.
Use the provided Tripod Tool to
4
finish tightening.
NOTE
For the best experience, use a
sturdy tripod.
Visit
soloshot.com
to purchase a
recommended tripod.