SETTINGS Update and Registration Live Streaming Wi-Fi Moving the Base SD Card LOCATION SETUP Tracking Distance Display Setting up the SOLOSHOT Tripod Battery Safety and Security ADVANCED TRACKING SETTINGS Date & Time Track Mode Account HOME SCREEN Field of View...
The Tag Power Button OLED Screen Function Button The Base and Camera Hot Shoe Mono Mic 3.5 mm Auxiliary Jack Indicator LED K-Lock Slot Accessory Port/Tag Charger Mini USB Charging Port + USB Type A Port HDMI Out Micro SD Card Slot...
For the best results, we tripod until you feel light finish tightening. recommend mounting the Base resistance from the panning on a Tripod with a 3/8” motor. Avoid excessive manual mounting screw. panning and tilting of the Base motors by hand.
Visit soloshot.com/sd-card for a list of compatible SD cards. Update and Registration Continue on next page Create a SOLOSHOT account at Power on the Base and follow the After registering your Tags, you soloshot.com/ss3setup. on-screen instructions to update are prompted to select the your device.
Base. Location Setup IMPORTANT Setting up the SOLOSHOT Tripod To ensure the best filming results: Open and set up the Tripod by unlocking the Leg Locks (a) and extending the telescoping legs until the Tripod is •...
SOLOSHOT INC IS NOT RESPONSIBLE FOR THEFT OR DAMAGE TO YOUR SOLOSHOT3 AND ITS ACCESSORIES. IMPORTANT Do not use SOLOSHOT near high voltage power lines, radar/radio jamming equipment, or telecom- munications towers. To ensure proper functionality of your SOLOSHOT, stay at least 500m (0.3mi) away from these areas.
Camera a few times in the area Track Modes. where you will be performing your activity. This will allow the Tap CONTINUE to begin Camera’s smart tracking system calibrating the system. to center you in the screen. USER MANUAL SOLOSHOT.COM...
Base, it must be: (See page 9). of the Base. • Powered on • Have been docked to the Base in the past • Be within the 2,000-ft. tracking distance • Have a GPS signal USER MANUAL SOLOSHOT.COM...
Always wear the Tag with Always wear the Tag with Clip with the button side aligned when Tag is in place. Check the buttons facing upward. button/screen side facing with the clip window. alignment and adjust if upward. necessary. USER MANUAL SOLOSHOT.COM...
Battery Level Displays the remaining battery level. Tracking Status Displays whether the TAG would like to be tracked. GPS Status Displays the status of the TAG’s GPS signal. Record Displays if TAG would like to be recorded. USER MANUAL SOLOSHOT.COM...
Poor GPS Signal Start and Stop Recording FROM THE BASE FROM THE TAG Press and hold the button to toggle record on or off. Tap the RECORD button to start or stop recording. Record ON Record OFF USER MANUAL SOLOSHOT.COM...
WARNING Regardless of recording resolution, the live stream video is compressed at 720p60. Your live streams appear on the SOLOSHOTapp and app.soloshot.com. All live streams are Be sure to download the SOLOSHOTapp on the App Store or Google Play! viewable to the public on the SOLOSHOTapp.
Tracking settings can be adjusted prior to calibration or any time during tracking/filming. The default settings are: Camera Mode: Video Resolution: 1080p60 fps Framing: Bottom Center Field-of-View: Medium NOTE Trajectory: 3 Seconds Tracking and recording stop when accessing settings. USER MANUAL SOLOSHOT.COM...
Top Left Top Center Top Right specified trajectory time setting. In other words, if you plan on being inside a barrel for more than 3 seconds, then set trajectory to 4 seconds or more. Middle Left Middle Center Middle Right Once the Camera reacquires the Tag’s signal, it will...
By default, the Camera is set to Resolution Parameters Tap the BACK ARROW to exit Video Mode with a resolution of CAMERA SETTINGS. Optic65 Optic25 1080p60. 1080p30 4k30 1080p60 1080p30 Within Camera Settings, tap 720p120 RESOLUTION to change the 1080p60 record resolution. 1080p120 USER MANUAL SOLOSHOT.COM...
FROM THE BASE REQUIREMENTS Press the Button on the Tag Tap the SHUTTER/RECORD • In Photo Mode and the Camera will take photos button. based on your selected settings. • Base does not need to be calibrated. USER MANUAL SOLOSHOT.COM...
Multi-Mode Follow Mode Settings REQUIREMENTS On each Base, choose between Closest three (3) settings that instructs The Base will track the closest • At least two (2) Tags and/or your Base which Tag to follow. Tag. Bases. Each Base may be configured Fastest •...
On all Bases being used: Enter the TAG MANAGER. Toggle tracking on for the Tags that you would like to track. The Tags that you’d like to track in the session must be saved to the Base. USER MANUAL SOLOSHOT.COM...
10, 100, 300, 450, 900, 1800 configure how many photos you’d like to take over a period of Tips: time. Use a shorter interval [1-3 seconds] when capturing faster moving objects. Use a longer interval [5 seconds or more] when capturing slower...
OLED will display a graphic indicating that it needs to be docked to the Base. Dock the Tag into the accessory port on the front of the Base. Follow the onscreen instructions and continue with the update process. USER MANUAL SOLOSHOT.COM...
Within the Account app, view the name and details associated with your Base(s). Creating an account is part of the process when using a new Base for the first time. Go to soloshot.com/ss3setup to create an account. Base Name: Your first Base registered with your account will be listed as B1_username.
Audio Compression: AAC 48KHz (128Kbit/s) The hot shoe can be used to mount an external mic and will Internal Mic: Mono, Digital accommodate future External Mic: Analog, Stereo (3.5mm plug) SOLOSHOT accessories. Remote Wireless Mic: Supported (purchased separately) Maintenance The Base contains many...
Need help?
Do you have a question about the 3 and is the answer not in the manual?
Questions and answers