Getting Started; Step 2: Setting Up The Remote Commander - Sony SLV-KH9ME/PS Operating Instructions Manual

Step 2
Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first, then
push in and down until the positive
(+) end clicks into position.
Using the remote commander
You can use this remote
commander to operate this unit
and a Sony TV. Buttons on the
remote commander marked
with a dot (•) can be used to
operate your Sony TV. If the
TV does not have the g symbol
near the remote sensor, this
remote commander will not
operate the TV.
To operate
the unit
a Sony TV
Set TV / VIDEO to
VIDEO and point at the remote sensor on the unit
TV and point at the remote sensor on the TV
Remote sensor
1 2 3
1 2 3

Getting Started

TV / VIDEO
continued
5