Table of Contents
Advertisement
Installation and Operation Manual
XX279-00-00
VN-KEYPAD for ViconNet
Vicon Industries Inc.
Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the
operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed
to be used in life-critical situations and must not be used for this purpose.
www.vicon-security.com
Document Number: 8009-8279-00-00
Issued: 116
Product specifications subject to change without notice.
Copyright © 2016 Vicon Industries Inc. All rights reserved.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon VN-KEYPAD
Summary of Contents for Vicon VN-KEYPAD
- Page 1 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed to be used in life-critical situations and must not be used for this purpose.
-
Page 2: Fcc Notice
FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15 for a Class B digital device. WARNING his equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause interference to radio and television communications. -
Page 3: Important Safeguards - Indoor Use
The product shows a significant change in performance. 2. Retain Instructions - Retain all safety and operating 19. Replacement Parts - Use only Vicon specified replacement instructions for future reference. parts or an approved equivalent to prevent unit damage and 3. -
Page 4: Important Safeguards - Indoor Use (Cont)
Important Safeguards – Indoor Use (Cont) 25. For Rack-Mounted Units Only – The following precautions apply to all rack-mounted units. Elevated Operating Ambient - If installed in a closed or multi- unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. - Page 5 VN-KEYPAD Keypad for ViconNet Introduction The information in this manual covers installation, programming and operation for the VN-KEYPAD. The installation procedures should only be performed by a qualified technician using approved materials in accordance with the national Electrical Code ANSI/NFPA 70, state and local wiring codes.
- Page 6 Display Controls Shift Key Figure 1 VN-KEYPAD The controller employs a three function, proportional joystick for pan, tilt and zoom; focus and iris controls are available via pushbutton controls located next to the joystick. A Jog/Shuttle wheel allows precise control of video playback.
-
Page 7: Installation
When installing on Windows environment, the OS will automatically assign a port number which may not necessarily meet the needs of the user. To change the serial port number: 1. Connect and install the VN-KEYPAD. 2. Go to the settings in Control Panel/System/Hardware/ Device Manager. -
Page 8: Installing The Upper Panel
Installation and Operation Guide Installing the Upper Panel The upper panel that denotes the button functions is supplied and may be affixed to the keypad or remain secured by the supplied clear plastic overlay. By default, the standard keypad is set for right-handed users, with the joystick on the right and the Jog/Shuttle on the left. -
Page 9: Setup Options
Installation and Operation Guide Configuration Setup Options A specific key press sequence allows users to enter the setup mode. This allows the user to: • Set the keypad orientation (left- or right-handed users) • Calibrate the joystick Press the CLOSE, P/T SPEED and SHIFT keys and then release them in the reverse order (SHIFT, P/T SPEED, CLOSE). -
Page 10: Viconnet/Vmdc Systems
Installation and Operation Guide ViconNet/VMDC Systems Setting up the Control Driver For the keypad to work with ViconNet, the correct driver must be installed for the keypad. The correct driver is included in the ViconNet 8.1 software. It can then be configured through the Controls and Events Drivers Settings. From the ViconNet Main window, click . - Page 11 Installation and Operation Guide 3. Click the Add Driver button to display a list of the pre-installed drivers. 4. From the Driver Name list, select the required driver. The driver name for this device is USBkeypad.dll. 5. Select the Internal COM Address with which to communicate with the device and the Port Number it is using on Windows (refer to page 3);...
-
Page 12: Operation
Installation and Operation Guide Operation The VN-KEYPAD provides control access to NVRs/Workstations/Kollectors, including multi-screen controls, video controls, Quick Playback and macro selection. Controls also include standard PTZ, preset selection and camera/monitor select actions. NVRs/Workstations/Kollectors are configured within the ViconNet system. Refer to the appropriate Kollector and ViconNet documentation as needed. - Page 13 Installation and Operation Guide The Quick Playback buttons provide playback for 15, 30, 60 and 90 seconds. 1. Select the quadrant (camera) for playback. The quadrant will be outlined with pink border. 2. Press the Quick Playback button for the desired number of seconds of playback.
- Page 14 Installation and Operation Guide 1. Pressing the individual function key for play or pause commands the Kollector/NVR/WS to perform those functions on the video from the selected camera quadrant. 2. The Jog/Shuttle center wheel provides for Frame Advance and Frame Reverse.
-
Page 15: Maintenance
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A. -
Page 16: Technical Information
Installation and Operation Guide Technical Information Electrical Input Voltage: Via USB Power Consumption: 350 mA Connectors, Controls and Display Connector: USB cable for connection as serial device and power Front Panel: Numeric Keypad: Number entry Camera Key: Enters camera number Monitor Key: Enters monitor number Function Keys:... - Page 17 “autopan” or “tour” modes of operation. Such continuous operation is outside the scope of this warranty. 11. Any product sold as “special” or not listed in Vicon’s commercial price list: One year from date of original retail purchase.
- Page 18 Except as provided in this written warranty and to the extent permitted by law, neither Vicon nor any affiliated shall be liable for any loss, (including loss of data and information), inconvenience, or damage, including, but not limited to, direct, special, incidental or consequential damages, resulting from the use or inability to use the Vicon product, whether resulting from breach of warranty or any other legal theory.
- Page 19 Vicon Industries Inc. Internet Address: www.vicon-security.com...
Need help?
Do you have a question about the VN-KEYPAD and is the answer not in the manual?
Questions and answers