Dynojet POWER COMMANDER V Installation Instructions page 3

FIG.A
FIG.B
FIG.C
19-005 www.powercommander.com
1 Remove the seat and left side panel.
2 Install the PCV on top of the stock ECU using the supplied velcro (Fig. A).
Make sure to clean both surfaces before attaching with the alcohol swab.
3 Unplug the stock wiring harness from the Throttle Position Sensor (Fig. B).
Unplug
The TPS is located on the front side of the throttle bodies.
4 Plug the 3-pin connectors of the PCV in-line of the stock TPS and wiring
harness (Fig. C).
2009-2011 Polaris Sportsman 850 - PCV - 3