FUNAI DPVR-7630D Service Manual page 21

10. Press [CLEAR] button on the remote control unit.
Fig. h appears on the screen.
" ******* " differs depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
When "OK" appears on the screen, the factory
default will be set. Then the firmware renewal
mode is complete.
11. To exit this mode, press [STANDBY-ON] button.
EXIT: POWER
Fig. h
1-9-2 E8B05FW