Software Features - BCDVideo BCD-RGD-804P-MT Installation Manual

BCD-RGD-804P-MT
1 Introduction
1.2 bcd-rgd-804p-mt industrial ethernet switch
The BCD-RGD-804P-MT is a managed industrial Ethernet switch with 8*10/100/1000M auto sensing electrical
ports and 4*1000M SFP ports. It supports PoE/PoE+ with a variety of management: WEB, Telnet, Console (CLI),
SSH, etc., as well as proprietary network management software for centralized management, centralized monitoring,
centralized configuration. Most importantly it supports advanced ERPS (Ethernet Ring Protection Switching) as well
as STP, RSTP and MSTP.
1.2

software features

− PoE management
− ERPS ( recovery time ＜30ms over 128 units of connection)
− Ring coupling, STP / RSTP / MSTP
− SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
− Event notification through Syslog, Email, SNMP Trap, etc.
− WEB,＜Telnet,＜SSH,＜Console(CLI)＜network software multiple manage and configure
− Open and close port, binding MAC and port
− 802.1x network access control
− 802.1Q protocol, Isolate network flow
− Radius Centralized password management
− SNMPv3 Encrypted authentication and access security
− Qos guarantee based on real-time traffic
− Dual tag VLAN (802.1Q) and GVRP
− IGMP Snooping multicast function
− Port status, statistics, mirroring, and secure configuration
− RMON remote management
2
Industrial Gigabit Ethernet Switch with PoE+
12 ports: 8 PoE+ ports, 4 optical uplink ports
www.bcdvideo.com