Jeep Grand Cherokee 2017 Manual page 77

FLUIDS AND LUBRICANTS
Engine
Component
Engine Coolant
Engine Oil
Engine Oil Filter
Fuel Filters
Fuel Selection
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
Formula OAT (Organic Additive Technology).
We recommend you use 5W-40 synthetic engine oil such as Mopar or Shell
Rotella that meets FCA Material Standard MS-10902 and the API CJ-4 engine
oil category is required.
We recommend you use Mopar Engine Oil Filters.
We recommend you use Mopar Fuel Filter. Must meet 3 micron rating. Using a
fuel filter that does not meet the manufacturers filtration and water separating
requirements can severely impact fuel system life and reliability.
Use good quality diesel fuel from a reputable supplier in your vehicle. Federal
law requires that you must fuel this vehicle with Ultra Low Sulfur Highway
Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur
Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the
emissions control system. For most year-round service, No. 2 diesel fuel
meeting ASTM specification D-975 Grade S15 will provide good performance.
We recommend you use a blend of up to 5% biodiesel, meeting ASTM
specification D-975 with your diesel engine.This vehicle is compatible with
biodiesel blends greater than 5% but no greater than 20% biodiesel meeting
ASTM specification D-7467 provided the shortened maintenance intervals
are followed as directed.
TECHNICAL SPECIFICATIONS 75
6