Basic Operation; Touch Screen Controls - Zte F930 User Manual

ZTE F930 User Manual
Notes:
Make sure that the adapter‟s connector is inserted correctly. Do not force the connector into the port.

The battery will remain fully charged for 3 to 4 hours.

Only use the charger provided by the original provider. Using an unapproved charger might be

dangerous and violate the authorization and warranty rules of the phone.
If the phone is used too often when the battery is low or not used for a long time, the screen may not

display the charge indicator until the battery has been continuously charged for 10 to 40 minutes.
To get the maximum performance out of your battery, it is recommended that you completely charge the

battery before using the phone for the first time. A new battery‟s full performance is only reached after
three complete charge and discharge cycles have been finished.
When the battery is fully charged, unplug the charger and disconnect it from the phone.

You can use the provided charger or the USB data cable to charge the battery.

Charging is only possible within a temperature range of 0° C to 45° C.


Basic Operation

Touch Screen Controls

Touch or tap
Tap or touch items on the screen to run the application or make a selection. Use the stylus to select with
greater precision and see Section 9.10 to calibrate the touch screen controls.
Swipe
Swipe your finger vertically to scroll through contacts, messages, music, photos, and more.
Slide
Press and hold your finger on the screen to drag. While dragging, do not release your finger until you have
reached the target position.
Flick
Confidential and Proprietary Information of ZTE CORPORATION 5