Power On/Off; Charging Your Phone - Zte F930 User Manual

Caution:
Only use approved memory cards for this device. Any use of unapproved memory cards might cause loss
of information or damage to your phone.
Tips:
Do not remove the memory card while reading or writing to the card. Doing so might corrupt the
•
information on the card or phone. If possible, insert and remove the memory card while the phone is
turned off.
If you want to format the memory card on your PC, make sure you select the FAT Formatting type. If
•
this is not done the memory card might not be identified by your phone.

Power On/Off

Notes:
Do not turn your phone on in areas in which wireless phone use is not permitted, or when it could cause
interference or danger.
Press and hold the End Key to turn on or off the phone.
Tips:
When prompted, enter your PIN (Personal Identification Number) code or handset code and click the

OK Key to confirm.
The PIN code is the password provided by your network service provider. You cannot use the (U)SIM

card without it.
When the PIN code or handset code is accepted, the phone automatically searches for the network. After

a few seconds, your phone displays standby mode.

Charging Your Phone

Your phone uses a rechargeable battery. When you first unpack the phone, the battery is not fully charged,
but there might be enough power to turn on the phone. You should flatten the battery by using all of the
available power before charging the battery for the first time.
Insert the USB charger lead into the USB port as shown below.
4 Confidential and Proprietary Information of ZTE CORPORATION
ZTE F930 User Manual