Advertisement
INSTALLATION
Scenario 2 - User first installs sound bar, then mounts clamps to handlebar.
• Choose the correct size strap clamp for the handlebars.
• Slide the sound bar into the brackets from the left side, so the brackets can clear the buttons
without damaging them.
• Ensure that the spacing between the brackets is between 3" and 6.75".
• Assemble mid-section to bottom bracket using included 4mm Allen Screw and 10mm Hex Nut.
• Rotate the sound bar so the speakers are directed at the rider's head.
• Tighten the 5mm Allen Screws to lock the sound bar in place.
• Tighten the 2mm Set Screws.
• Connect wires to power, ground, and ignition.
ORIENTATION EXAMPLES
5
M T X . C O M
MTX005245 MUDHSB Owners Manual.indd 5
7/9/15 2:10 PM
Advertisement
