Checking The Nozzles Using The Product Buttons - Epson Expression ET-2700 EcoTank User Manual

Parent topic:

Checking the Nozzles Using the Product Buttons

You can check the print head nozzles using the buttons on your product.
1. Press the
2. Load a few sheets of plain paper in the product.
3. Hold down the
4. When the product turns on, release both buttons.
The product begins printing a nozzle check pattern.
Note: It can take a few seconds for the nozzle check to start printing. If the nozzle check does not
start printing after a few seconds, make sure there is paper loaded in the printer.
5. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
6. If there are no gaps, the print head is clean and you can continue printing.
If there are gaps or the pattern is faint, clean the print head.
Print Head Maintenance
power button to turn the product off.
stop button and press the power button to turn the product on.
105