Advertisement
KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future reference.
Air Intake Opening
Blower Discharge
Opening
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
Edger
. . . . . . . . . . . . . . . . . . . . .
Cultivator
. . . . . . . . . . . . . . . . . .
Pruner
. . . . . . . . . . . . . . . . . . . .
Pruner
. . . . . . . . . . . . . . . . . . . .
Brushcutter*
. . . . . . . . . . . . . . .
*not designed for use with electric powerheads
WARNING:
Always disconnect pow-
erhead spark plug (or disconnect powerhead
from power source) before removing or instal-
ling attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or installing at-
tachments, place the unit on a flat surface for
stability.
1. Loosen the coupler by turning the knob
counterclockwise.
OPERATION
Shaft
MODEL:
Attachment
PPB1000E
PPB2000T
PPB5000P
PPB5500P
PPB4000C
2. Press and hold the locking/release button.
Locking/Release
Button
Attachment
3. While securely holding the upper shaft,
pull the attachment straight out of the
coupler.
-- 5 --
Hanger
Coupler
LOOSEN
Knob
TIGHTEN
Upper Shaft
Coupler
Advertisement
