Physical Specifications; Agency Approvals; Typical Configurations - Lenovo Flex System EN6131 Product Manual

Table of Contents


There is a 1-year, customer-replaceable unit (CRU) limited warranty. When installed in a chassis, these I/O
modules assume your system's base warranty and any Lenovo warranty service.

Physical specifications

The EN6131 40Gb Ethernet Switch has the following physical specifications:
Dimensions and weight (approximate):
Height: 30 mm (1.2 in.)
Width: 401 mm (15.8 in.)
Depth: 317 mm (12.5 in.)
Weight: 3.7 kg (8.1 lb)
Shipping dimensions and weight (approximate):
Height: 114 mm (4.5 in.)
Width: 508 mm (20.0 in.)
Depth: 432 mm (17.0 in.)
Weight: 4.1 kg (9.1 lb)

Agency approvals

The EN6131 40Gb Ethernet Switch conforms to the following standards:
US/Canada: cULus
EU: IEC60950
International: CB
Type I / II
EU: IEC 60068-2-32: Fall Test

Typical configurations

A typical application of the end-to-end 40 Gb Ethernet connectivity includes high performance computing
(HPC) interconnects and an enterprise data center's highly available production network.
HPC interconnect
In this configuration, there are two networks: a production network and an interconnect network. The
production network consists of EN4093R 10Gb Scalable Switches that are connected to the RackSwitch™
G8264 10 GbE switches through redundant aggregated 10 Gb uplinks. The interconnect network consists
of EN6131 switches connected to each other through 40 Gb aggregated uplinks. The topology is shown in
Figure 6.
Lenovo Flex System EN6131 40Gb Ethernet Switch


Table of Contents

Table of Contents