Table of Contents
Advertisement
Supported I/O modules
The EN4132 2-port 10Gb Ethernet Adapter supports the I/O modules listed in the following table. One or
two compatible switches must be installed in the corresponding I/O bays in the chassis. Installing two
switches means that both ports of the adapter are enabled.
Table 3. I/O modules supported with the EN4132 2-port 10Gb Ethernet Adapter
Description
IBM Flex System Fabric CN4093 10Gb Converged Scalable Switch
IBM Flex System Fabric EN4093R 10Gb Scalable Switch
IBM Flex System Fabric EN4093 10Gb Scalable Switch
IBM Flex System EN4091 10Gb Ethernet Pass-thru
IBM Flex System EN2092 1Gb Ethernet Scalable Switch
The following table shows the connections between adapters installed in the compute nodes to the switch
bays in the chassis.
Table 4. Adapter to I/O bay correspondence
I/O adapter slot in the server
Slot 1
Slot 2
The connections between the adapters installed in the compute nodes to the switch bays in the chassis
are shown in the following figure.
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter
Port on the adapter
Corresponding I/O module bay in the chassis
Port 1
Module bay 1
Port 2
Module bay 2
Port 1
Module bay 3
Port 2
Module bay 4
Supports the
Part number
EN4132 adapter
00D5823
No
95Y3309
Yes
49Y4270
Yes
88Y6043
Yes
49Y4294
No
5
Advertisement
Table of Contents
