Maintenance And Care; To Remove The Bathing Cushion From The Bath - Mangar HBA0120 User Instructions

Maintenance and Care

To remove the Bathing Cushion from the bath

• After use, drain the bath water and release
the suction cups from the floor of the
bath. Do this by lifting the rim of a pair of
suction cups (fig. 11) to release the suction
between suction cup and bath.
• Tilt the Bathing Cushion so that the
released suction cups do not re-adhere to
the surface (It helps to place a small towel
beneath them to stop them re-adhering to
the bath).
• Release the remaining pair of suction cups
by lifting their rims as before.
• Remove the Bathing Cushion from the bath
and disconnect the air hose.
NOTE: To deflate the Bathing Cushion when
not sitting on it, disconnect the air hose.
The Airflo compressor will not suck air from
the Bathing Cushion. To speed up deflation,
apply some weight to the Bathing Cushion by
pressing down on it.
For ease of carrying and hanging up for storage,
fold the Bathing Cushion as indicated (fig. 12)
and pass the 'handle' (C) through the slot
between the seat and backrest.
10
11
12
C