Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Mangar HBA0120
- Page 1 Bathing Cushion User Instructions...
-
Page 2: Safety Information
Safety Information Ensure that you read and understand this instruction manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in damage and/or serious injury. Please keep these instructions in a safe location for future reference WARNINGS (Risk of possible injury or other serious adverse reactions) •... -
Page 3: Cautions
CAUTIONS (Risk of possible problems including device malfunctions, device failure, damage to the device or damage to other property) • Only recharge the battery with the Mangar International battery charger supplied with the Airflo compressor. • To prevent damage, always release the suction under each suction cup before lifting the Bathing Cushion from the bath. -
Page 4: Table Of Contents
Table of Contents Safety Information........................2 Warnings..........................2 Cautions..........................3 Product description........................5 Intended use ......................... 5 Construction.......................... 5 Standard product contents....................5 Installation and use........................6 Before fitting the Bathing Cushion in the bath..............6 Fitting the Bathing Cushion in the bath................6 Connecting the air hose and hand control................ -
Page 5: Product Description
The Bathing Cushion incorporates an air pressure relief valve which will not allow the cushion to be over inflated by the Airflo Mk3 compressor. Power is provided by the Mangar International Airflo Mk3 battery powered compressor. PLEASE READ the separate Airflo Mk3 compressor instructions before using your Bathing Cushion. -
Page 6: Installation And Use
Installation and Use Before fitting the Bathing Cushion in the bath • Remove any non slip mats from the area where the suction cups will be positioned. • Ensure the bottom of the bath is clean and smooth, with no oil or bath cleaner residues that will prevent the suction feet from sticking. -
Page 7: Connecting The Air Hose And Hand Control
Installation and Use Connecting the air hose and hand control • Connect the air hose from the Bathing Cushion to the Airflo air outlet socket (D fig. 4). • Connect the Hand Control (E) to the Airflo Hand Control socket (F). Dry trials (without water in the bath) •... -
Page 8: Using The Bathing Cushion
Installation and Use Using the Bathing Cushion WARNING: ALWAYS INFLATE THE BATHING CUSHION AND USE THE BATHING CUSHION TO LOWER YOURSELF INTO THE BATH. This allows the micro processor in the Airflo to calculate the required battery power to raise the Bathing Cushion and if it calculates that there would be insufficient power, it will not allow the hand control to operate the down function. - Page 9 Installation and Use to get out of the bath • When you have finished bathing, PLACE YOURSELF IN AN UPRIGHT SEATED POSITION CENTRALLY AND RIGHT TO THE BACK OF THE SEAT SO THAT YOU ARE TOUCHING THE BACKREST, WITH FEET AND KNEES DRAWN BACK (fig.
-
Page 10: Maintenance And Care
Maintenance and Care To remove the Bathing Cushion from the bath • After use, drain the bath water and release the suction cups from the floor of the bath. Do this by lifting the rim of a pair of suction cups (fig. 11) to release the suction between suction cup and bath. -
Page 11: Cleaning
• Check that the air hose and connector are not damaged. Mangar International recommends that your Bathing Cushion is inspected annually by either your supplier or other suitably qualified person. If required, Mangar International can provide the above inspection within an annual service contract. Please contact our Customer Service Department for further details. -
Page 12: Transportation/Storage
Maintenance and Care Transportation / Storage Disconnect the Airflo compressor from the Bathing Cushion before transporting so as to avoid accidental inflation of the cushion. Ensure that the Bathing Cushion is clean and thoroughly dry before storing. Failure to thoroughly dry the Bathing Cushion before storage may result in a build-up of mould on the surface of the product leading to a weakening of the fabric and consequential invalidation of the product warranty. -
Page 13: Appendices
Appendices Specifications Maximum user weight: 150kg (330lbs) 33cm 44cm Bathing Cushion weight: 2kg (4½lbs) Seat height (max/min): 40cm/0,5cm (approx) (16”/¼” approx) Seat width: 58cm (23”) (approx) 58cm Seat depth: 44cm (17½”) (ap- prox) 40cm (max) Air hose length: 1.8 metres (5’,11”) 0,5cm (min) Suction cups: Ø11cm (4¼”) -
Page 14: Spare Parts
Symbols used in instruction manual and on Bathing Cushion Warning - Read the instructions before use ‘Up’ button ‘Down’ button Type BF equipment (protection against electric shock) Mangar International reserves the right to alter product specifications and/or any of the information contained within this document without notice. -
Page 15: Certificate Of Conformity
Appendices DECLARATION OF CONFORMITY This is to certify that:- Bathing Cushion - HBA0120 complies with:- The requirements for Class 1 devices according to Annex VII of the Medical Devices Directive 93/42/EEC as amended by 2007/47/EC Signed: Date: September 2016 A. Donald (Finance Director)