Resolution CryptiX Setup Manual

RE656 Series CryptiX
HeliPad
is an arming station that provides real-time
system status. It is battery powered and requires no
installation tools. A direct wireless link to Helix allows
for local control of the Helix control panel, regardless
of network connectivity.

Features

• E ink display provides real-time status
®
• Non-mechanical capacitive touch interface
• Runs on user-replaceable AAA batteries
• 5 year warranty

Enroll

by first removing the battery pull tab. Then, press
MENU
to enter the enrollment menu. Next, place
Helix control panel into wireless enrollment mode.
Finally, press SELECT
• Once enrolled, arm and disarm Helix to
verify HeliPad is within range of Helix and
properly enrolled.

Install

on vertical surface using the 3M VHB
back of the mounting plate.
• See Pro Tips for recommendations about
using VHB tape.
• A #4 or #6 screw may also be used, but
only in addition to the VHB tape. The tape
prevents HeliPad from rotating on the wall.

Operate

using the capacitive buttons, which click when
activated. Note, Arming buttons won't click until they
are held for at least one second.
• Disarm by entering a valid 4-10 digit user
code on the number pad.
• Arm Away by pressing ARM AWAY
until HeliPad clicks.
• Arm Stay by pressing ARM STAY
until HeliPad clicks.
• Trigger a panic alarm by pressing ARM
STAY
until the display indicates a panic alarm.
HeliPad will click rapidly while buttons are
held.
Use the Helix installation guide to verify proper system setup.
HeliPad
™
to enroll HeliPad.
& ARM AWAY
™
tape on the
®
together
Mounting Screw
Plate Location
I