Table of Contents
Advertisement
– When the washing machine is lifted, protruding
ã
Caution!
Risk of tripping!
If the hose and mains lead are not routed properly,
there is a risk of tripping and injury.
Lay hoses and cables in such a way that there is no
risk of tripping.
ã
Caution!
The washing machine could be damaged.
– Frozen hoses may rip/burst.
– If the washing machine is lifted by protruding parts
²
– In addition to the safety information listed here, the local
– If in doubt, have the appliance connected by a specialist.
Installation area
²
Stability is important to prevent the washing machine from
wandering!
– The installation area must be firm and level.
– Soft floors/floor coverings are not suitable.
Installation on a wooden floor or floating floor
ã
Warning!
The washing machine could become damaged!
Secure the feet of the washing machine with holding
brackets.
Holding brackets: order no. WMZ 2200, WX 9756,
CZ 110600, Z 7080X0
²
– If possible, place the washing machine in a corner.
– Screw a water-resistant wooden board (min. 30 mm thick) to
28
parts (e.g. the lid) may break off and cause injuries.
Do not lift the washing machine by protruding
parts.
Do not install the washing machine in areas
exposed to frost or outdoors.
(e.g. lid), the parts may break off and the washing
machine could be damaged.
Do not lift the washing machine by protruding parts.
water and electricity supplier may have special requirements.
the floor.
Hide quick links:
Advertisement
Table of Contents
