Table of Contents
Advertisement
Connecting the water
ã
Caution!
Do not immerse the Aqua-Stop safety device in water.
²
– To prevent leaks and water damage, you must follow the
– Only operate the washing machine using cold drinking water.
– Do not connect to the mixer tap of an unpressurised hot-
– Do not use a used inlet hose. Only use the inlet hose
– If in doubt, have the appliance connected by a specialist.
Water supply
²
Do not bend, squash, modify or cut through the water supply
hose (otherwise its strength is no longer guaranteed).
Optimum water pressure in the supply network: 100-1000 kPa
(1-10 bar)
Ø
Ø
1.
ã
Caution!
The thread on the screw connection may be
damaged
If the screw connections are tightened too much with
a tool (pliers), the thread may be damaged.
Only tighten the screw connections by hand.
PLQ PP
30
instructions in this section.
water boiler.
supplied or one that was purchased from an authorised
specialist retailer.
When the tap is open, the water flow is at least 8 l/min.
If the water pressure is higher than this, a pressure reducing
valve must be installed.
Connect the water supply hose.
At the tap (¾" = 26.4 mm):
PD[
PD[
ƒ
ƒ
At the appliance:
Hide quick links:
Advertisement
Table of Contents
