Commissioning; Volume Setting - ABB Welcome IP HSM36-GU Operating Instructions Manual

Pos: 35 /CNDEX/01 Heading/1. Heading/Heading_Commissioning @ 57\mod_1487828936105_15.docx @ 751257 @ 1 @ 1
7

Commissioning

Pos: 36 /CNDEX/01 Heading/1.1.1 Heading/Heading_Volume setting @ 57\mod_1487752846570_15.docx @ 750674 @ 3 @ 1
7.1.1

Volume setting

Pos: 37 /CNDEX/08 Commissioning/Volumen setting_HSM36-GU @ 62\mod_1498197885038_15.docx @ 793347 @ @ 1
Fig. 2: Volume setting
■ Press the
■ Select "Volume" in the left list, and then click "Adjust" to enter setting interface.
On this page,
Click on "+" and "-" to adjust the "Ring tone volume".
Tick the "Touch Tone" box to enable the touch tone. (Enable by default)
Tick the "Button Tone" box to enable the button tone. (Enable by default)
Click "OK" to save your settings.
Pos: 38 /CNDEX/99 Auxiliary tools/++++++++++++++ page break +++++++++++++++ @ 57\mod_1487814735946_0.docx @ 750979 @ @ 1
Operating Instructions VER:1.0
button to open the "Basic setting" interface.
Commissioning
│8