5. Starting the programme
Starting the programme
Touch the flashing Start/Stop sensor.
The door will lock (the symbol will
appear in the control panel) and the
programme will start.
If a Delay start time has been selected,
it will count down in the time display. At
the end of the Delay start time or
immediately after the programme has
started (if no Delay start time has been
selected), the programme duration will
appear in the time display.
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor starts flashing.
Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running
programme).
26