Table of Contents
Advertisement
ENGLISH
SPECIFICATIONS
Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Model
Steel
Wood
-1
)
Overall length
Net weight
Safety class
equipment
and
environmentally
compatible
) : 81 dB(A)
pA
DA3010
10 mm
25 mm
0 -2,400
270 mm
1.4 kg
END201-4
Vibration
The
vibration
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
EC-DECLARATION OF CONFORMITY
Model; DA3010,DA3010F,DA3011,DA3011F
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
its
000230
Responsible Manufacturer:
ENE032-1
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
ENF002-1
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
ENG101-1
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
2
DA3010F
DA3011
10 mm
10 mm
25 mm
25 mm
0 -2,400
0 -2,400
270 mm
270 mm
1.4 kg
1.4 kg
/II
total
value
(tri-axial
) : 2.5 m/s
h,D
CE2007
Tomoyasu Kato
Director
DA3011F
10 mm
25 mm
0 -2,400
270 mm
1.4 kg
ENG202-1
vector
sum)
2
or less
ENH101-8
GEA005-2
Advertisement
Table of Contents
