Mainboard And I/O Panel Disassembly - EBN Technology X-PPC 710 Service Manual

6.2. Mainboard and I/O Panel Disassembly

1. Loosen the four screws.
2. Loosen the four screws by 1.5 mm hexagon socket spanner as shown
below, and then you can remove the mainboard from the device
3. Remove the two screws by #1 Phillips screwdriver as shown below, and
then you can remove the I/O bracket from the back cover..
4. Loosen the four screws by 1.5 mm hexagon socket spanner as shown
below, and then you can remove the VGA and COM 5 from the I/O bracket.
Chapter 10
7