MSI Z370 GODLIKE GAMING Manual page 79

fDRAM VRM Over Temperature Protection [Auto]
Sets the temperature limit on DRAM VRM for over-temperature protection. The
DRAM frequency may be throttled when VRM temperature over the specified value.
If set to Auto, BIOS will configure this settings.
fCPU SA Phase Control [Auto]
Controls PWM phase proportionally to the CPU SA loading.
[Auto] BIOS will set the CPU system agent PWM phase automatically.
[Optimized] Sets the optimum power phase profile, it could provide an optimum
power-saving capability.
[Disabled] Disables the PWM power phase switching feature.
fCPU SA Over Voltage Protection [Auto]
Sets the voltage limit for CPU SA over-voltage protection. If set to Auto, BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
fCPU SA Under Voltage Protection [Auto]
Sets the voltage limit for CPU SA under-voltage protection. If set to Auto, BIOS will
configure this setting automatically.
fCPU SA Over Current Protection [Auto]
Sets the current limit for CPU SA over-current protection.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the current range of over-current protection.
fCPU SA Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU SA voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to Auto, BIOS will configure this setting
automatically.
fCPU SA VRM Over Temperature Protection [Auto]
Sets the CPU SA VRM over-temperature protection. The CPU frequency may
be throttled when temperature over the specified value. If set to Auto, BIOS will
configure this settings.
f CPU Core Voltage Mode [Auto]*
Sets the CPU Core voltage mode.
[Auto]
[Adaptive Mode]
[Override Mode]
[Offset Mode]
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
This setting will be configured automatically by BIOS.
Sets the adaptive voltage automatically for optimizing the system
performance.
Allows you to set the voltage manually.
Allows you to set the offset voltage and select the voltage offset
mode.
offset voltage.
79
BIOS Setup