Linking The Scanner To A Bluetooth Device - PSC PowerScan 7000BT SRI Quick Reference Manual

Linear imager
Table of Contents

Advertisement

Figure 4. Labeling and Nomenclature
This illustration shows label placement ONLY.
For actual regulatory, patent and other applicable
information, view the labels on the product intself,
or call your nearest sales or service office.
Scanner
Scan
Window
Trigger
This product is covered by patents listed in the product manual
Laser Radiation — Do not stare into Beam
and at www.psc.com/patents.
Complies with 21CFR 1040 Rules
1mW — 650 nm Class 2 Laser Product
Based on 10 sec — EN60825-1:2001
Avoid Exposure — Laser Radiation is Emitted from this Device.
2005-04-18
Class No: PS7000-123400-1200
Model PS7000
This product is convered by patents listed in the
I/F: RS-232
product manual and at www.psc.com/patents.
S/N and Laser Safety Label

Linking the Scanner to a Bluetooth Device

A scanner can optionally be linked to a PC with a Bluetooth radio
installed.
1. Ensure that the Bluetooth device and its driver are installed on the
PC.
2. On the PC, open the control window for the Bluetooth device
(usually called "My Bluetooth Places"). Follow the instructions for
the Bluetooth device to disable the security setting for the Blue-
tooth serial port.
3. Scan the "
6
PSC Inc.
S/N: B000001
959 Terry St
Eugene, OR
97402 USA
Indicator
LEDs
Speaker
Port
Battery Pack
Battery Latch
" bar code below.
Link to a PC
Link to a PC
Antenna
Link
Button
Amber LED
Green
LED
Scanner
Latch
PowerScan® 7000BT SRI
Link Bar Code
Regulatory
Label
Base Station

Advertisement

Table of Contents
loading

Table of Contents