Table of Contents
Advertisement
Figure 1. Battery Pack Installation & Removal
Release Latch
Verifying Scanner Operation Before Linking
to the Base Station
Once a charged Battery Pack has been installed in the scanner, scan a
good sample bar code of the symbology
grammed to read. If unsure how to do this, see the section on
in this manual. Tip: The part number bar code on the back cover
Scan
of this manual is a Code 39 symbology sample.
The system may signal with one or a combination of indicators depend-
ing upon how the scanner and Base Station are programmed to respond
(see LED and Beeper Indications for details). If your scanner fails to read
a sample bar code of a symbology it is programmed to read, turn to the
section titled,
Troubleshooting
1. To enable more bar code symbology types, reference the Product Reference Guide
(PRG).
Quick Reference Guide
Scanner
Alignment Pins
Battery
Pack
1
type your scanner is pro-
.
Getting Started
Release Latch
How to
3
Advertisement
Table of Contents
