Table of Contents
Advertisement
Software
Software for Windows PCs (XP, Vista and
W i n d o w s 7 ) i s p r o v i d e d t o e x p a n d t h e
operational capabilities of the Renewable
Energy Monitor. MACs are currently not
supported. Connect the USB cable between
the Monitor and your computer for vivid
graphical displays of data.
Installing the Software
Insert the supplied CDROM disc into your
computer and follow the directions in order to
load the software.
Running the Software
After the software is installed
on your computer a Desktop
icon like the one here is
displayed. Double-click the
icon to launch the software.
Tip:
Always attach the USB cable between
the Renewable Energy Monitor and the
computer BEFORE you click on the REM
icon to start the software. Then click on the
Connect icon once the software is visible on
your computer.
5
Connecting
Once the software is displayed on your
computer screen, click the Connect icon on
the bottom-right of the screen. It will turn from
red to green to show that it is connected to the
Renewable Energy Monitor.
Tip:
Nothing will happen unless you
click the Connect icon and the number
below it represents the com port attached
to the Renewable Energy Monitor.
to the "More Details" section for a further
explanation.
Plot Area
The plot area displays the line plots of voltage,
current, power, resistance and RPM – all at the
same time. This data is updated five (5) times
a second from the Renewable Energy Monitor
so it always represents the latest information
coming from your experiments.
Refer
Advertisement
Table of Contents
