Table of Contents
Advertisement
Color-Coded Plotting Lines
Each data plot is in a different color in order to
make it easy to see what is being measured.
Green -
Voltage in volts
Blue
-
Current in amps
Red
-
Power in watts
Black -
Resistance in ohms
Pink
-
RPM x 100
Adjusting the Plot Scale
You can change the plot
scale to match the incoming
data from the Renewable
Energy Monitor by using the
Plot Scale icon. The vertical
+ and – control the vertical
scale while the horizontal +
and – control the time scale. Clicking the reverse
arrow icon (bottom-left) clears the screen and
allows a fresh plot of data to be displayed.
Meters and LED On-Off buttons
Four vertical meters display the voltage, current,
power and resistance along with corresponding
numbers at the bottom.
buttons at the bottom of each meter turns the
corresponding plot line ON or OFF. The LEDs are
color coded to match the plot lines to make it easier
to understand.
Clicking any of the LED
Joules and RPM Display
Joules is a measure of energy (power x
time). It is equivalent to a watt-second
or the number of watts generated in one
second and shows how much energy the
experiment is generating.
RPM is displayed as RPM x 100 in order to
better fit in the plot area. For example an
RPM reading of 1436 is shown as 14.36.
Screen Snapshots
Yo u c a n c a p t u r e
a snapshot of the
screen at anytime
by clicking the top
S c r e e n C a p t u r e
icon. Then click the
Screen View icon
below it to see what
you captured.
6
Advertisement
Table of Contents
