Midi In Channels - E-Mu XL-7 Operation Manual Addendum

MIDI In Channels

• MIDI Footswitch
• Play/Stop
• Play
• Stop/RTZ
• Punch I/O
• Tap Tempo
• Channel +
• Channel -
• Sequence +
• Sequence -
This menu allows MIDI data received at the MIDI input port to control
either the internal "A" or "B" channels. With this switch set to "B", you
could play an external MIDI keyboard on channels 1B-16B while channels
1A-16A remain dedicated to the internal sequencer.
MIDI IN CHANNELS
0 to 16: A
XL-7 / MP-7 Operation Manual Addendum
In this mode the footswitch is routed to the Patch-
Cord in the Preset Edit, Cords menu. It is also trans-
mitted out on the Footswitch Controller number as
programmed in the Controllers menu.
Pressing the footswitch once activates the Play
button on the front panel. Pressing the footswitch
again activates the front panel Stop button.
Pressing the footswitch activates the Play button on
the front panel. This works well in combination
with the following function.
Pressing the footswitch activates the front panel
Stop button. Pressing the footswitch again invokes
the Return-to-Zero function.
When the sequencer is playing, the footswitch will
activate the Record button in order to punch-in to
record mode. Pressing the footswitch again will
punch-out of record.
When the sequencer is stopped, repeatedly pressing
the footswitch cycles through the three record
modes: realtime, grid & step record.
Pressing the footswitch activates the front panel Tap
button, allowing you to tap in the current tempo
with your foot.
Pressing the footswitch increments the MIDI
channel number.
Pressing the footswitch decrements the MIDI
channel number.
Pressing the footswitch increments the current
pattern or song number. The next pattern will begin
playing when the current pattern ends.
Pressing the footswitch decrements the current
pattern or song number. The next pattern will begin
playing when the current pattern ends.
XL-7 / MP-7 Manual Addendum 19