E-Mu XL-7 Operation Manual Addendum page 7

The Asterisk
Asterisk No
Appears Asterisk
Pressing Rec Changing:
tempo,
List Edit
meter,
(press enter)
length,
Executing name, chan.
an Edit asssign, etc.
function
O O O O
Use the "Revert to
Saved Pattern" feature to
remove the asterisk and
discard your pattern edits.
The Asterisk
When a pattern (or song) has been edited and needs to be saved an asterisk
(*) appears in the display. The Save/Copy LED will also be flashing as a
reminder to save your work. The asterisk and your edits remain in the
single edit buffer even if you change patterns. Edits are only erased by
saving the pattern, editing another pattern, invoking the "Revert To Saved"
feature, or turning the unit off. Saving saves the current pattern and NOT
the edit buffer.
T
01 STOP
0
000 Start of IT
The following information is stored in non-volatile Flash memory, which is
recalled just before the pattern is played.
Important: Pattern and Song Setup information is saved as it was set at the
moment you saved the pattern or song.
• Pattern (Song) Name & Number
• Track Events (patterns only)
• Initial Tempo & Meter
• Master FX setup
• Track (Chan) to MIDI Channel mapping ....
• Track Mutes (patterns only) ..........................
• Bank/Program changes ................................
• Volume & Pan settings.................................
• Mix Output setup.........................................
• Arp Status (off, on, preset, master) ..............
XL-7 / MP-7 Operation Manual Addendum
Ln: 08 Bar: 01 . 1
Indicates that the Pattern
needs to be saved.
XL-7 / MP-7 Manual Addendum 7
*
These parameters are
stored for each track
used in a pattern or
each channel used in
a song.