E-Mu XL-7 Operation Manual Addendum page 14

14 E-MU Systems
Press the right Cursor button to move the cursor underneath the Event
6.
Scroll Field (<->).
Turn the data entry control to scroll through the event list and locate
7.
the event you want to edit.
Move the cursor to the data field you want to edit and make changes
8.
using the data entry control.
Press the Pattern Edit button to exit the Pattern Edit module.
9.
The Conductor Track (track 0)
The conductor track allows you to insert tempo and meter changes
anywhere in the pattern. Select the track below track 1 and the first screen
shown below will appear.
Conductor Track Screen
T
CT EVENT
C01 tempo:
T
CT EVENT
C01 meter:
To Insert a Tempo Change into the Conductor Track:
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Press the (-) Track/Channel button until "CT" appears in the track
3.
field.
Press the Enter button as prompted by the display to begin editing.
4.
Move the cursor to the lower line of the display and select tempo.
5.
Track field
T
CT EVENT
tempo: 120 bpm
Tempo/Meter field
Move the cursor under the bpm field and set the tempo.
6.
Set the Time Location where you want the tempo change to occur.
7.
XL-7 / MP-7 Operation Manual Addendum
<-> 003.01.000
138 bpm
<-> 003.01.000
04/4
<-> 002.03.008
BPM field
Time Location