Table of Contents
Advertisement
S S e e t t t t i i n n g g s s
Reset Phone
(Menu 6-7-7)
Resetting the phone restores the default settings of
all of user-selectable options.
When a confirming message displays, select Yes and
press the Select soft key to confirm. The phone
reboots, turning itself off and then back on, and
returns to the standby mode.
Note: The UIM card and phone memory cannot be
reset.
Select No or press
Card Setup
(Menu 6-7-8)
In this menu, you can use the options for the UIM
card.
PIN Check
When this feature is enabled, you must enter the PIN
assigned to your UIM card each time you switch the
phone on. Consequently, any person who does not
have your PIN cannot use your phone without your
approval. But emergency calls are available without
the PIN code.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
118
to cancel your selection.
Change PIN
This feature allows you to change the PIN of the UIM
card to a new one, provided that the PIN Check
feature (Menu 6-7-8-1) is enabled. You must enter
the current PIN before you can specify a new one.
Enter a new PIN.
UIM Lock
When this feature is enable, your phone only works
with the current UIM card.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
To unlock the UIM card, you must enter the UIM lock
code.
Entry Method
(Menu 6-8)
This option allows you to select the default text input
mode.
Select one of four input modes; T9 Word, ABC,
Pinyin and Stroke.
S S e e t t t t i i n n g g s s
119
Advertisement
Table of Contents
