Table of Contents
Advertisement
Terminal Block
Warranty and Liability
Information
Related Publications
ACS 501 Installation & Start-up Manual
A terminal block is a group of wire connections on a drive. This manual
expresses specific terminal blocks and connections as a letter, usually X, a
number, a colon (:), and another number. The letter and number to the left of
the colon represent the name of the terminal block, for example, X25. The
number to the right of the colon represents the terminal connection, for
example 16, on the terminal block. In this manual, a terminal connection
numbered 16, located on a terminal block named X25, is expressed as
X25:16.
The warranty for your ABB drive covers manufacturing defects. The
manufacturer carries no responsibility for damage due to transport or
unpacking.
In no event and under no circumstances shall the manufacturer be liable for
damages and failures due to misuse, abuse, improper installation, or abnormal
conditions of temperature, dust, or corrosives, or failures due to operation
above rated capacities. Nor shall the manufacturer ever be liable for
consequential and incidental damages.
The period of manufacturer's warranty is 12 months, and not more than 18
months, from the date of delivery.
Extended warranty may be available with certified start-up. Contact your local
distributor for details.
Your local ABB Drives company or distributor may have a different warranty
period, which is specified in their sales terms, conditions, and warranty terms.
If you have any questions concerning your ABB drive, contact your local
distributor or ABB Drives office.
The technical data and specifications are valid at the time of printing. ABB
reserves the right to subsequent alterations.
For related information, refer to the ABB ACS 500 Adjustable Frequency AC
Drives 2 to 350 HP Programming Manual Including Application Macros
(ACS 500-05) and the ACS 501 with Option Pack Users Manual (ACS 500-
08).
Chapter 1 – Introduction
1-3
Hide quick links:
Advertisement
Table of Contents
