HPE FlexNetwork 7500 Series Command Reference Manual page 159

Field
Hello lost
Authentication
Lifetime
Window size
Challenge
Statistics
PSB number
RSB number
LSP number
Request number
Peer number
SA number
# Display RSVP information for all interfaces.
<Sysname> display rsvp interface
Interface: GE1/0/1
State: Up
MPLS TE: Enabled
Hello: Enabled
Summary refresh: Enabled
Retransmit interval: 500 ms
Authentication: Enabled
Lifetime: 300 sec
Window size: 64
Challenge: Enabled
Bypass tunnels: Tunnel1
Interface: GE1/0/2
State: Up
MPLS TE: Enabled
Hello: Enabled
Summary refresh: Disabled
Retransmit interval: 500 ms
Authentication: Enabled
Lifetime: 300 sec
Window size: 64
Challenge: Enabled
Bypass tunnels: Tunnel1, Tunnel2
Table 42 Command output
Field
Logical interface handle
Description
Maximum number of consecutive lost or erroneous hellos allowed.
RSVP authentication state.
Idle timeout for RSVP security associations, in seconds.
Maximum number of out-of-sequence authenticated RSVP messages
that can be received.
State of the challenge-response handshake feature.
RSVP statistics.
Total number of PSBs.
Total number of RSBs.
Total number of LSPs established by RSVP.
Total number of RSVP request data blocks.
Total number of RSVP neighbors.
Total number of security associations.
Logical interface handle: 0x3
IP address: 50.1.0.1
RSVP: Enabled
BFD: Enabled
Reliability: Disabled
Retransmit increment: 1
Logical interface handle: 0x67
IP address: 50.2.0.1
RSVP: Enabled
BFD: Enabled
Reliability: Disabled
Retransmit increment: 1
Description
Logical interface handle, used to distinguish logical outgoing interfaces
on the RSVP interface.
151