Carton Contents - Porter-Cable A07513-0412-0 Instruction Manual

Engine Frame and
Wheel Assembly
High Pressure
Hose
1.
Place handle assembly onto frame,
depress the snap buttons, and
slide the handle assembly onto the
frame until snap buttons snap into
place.
2. Attach high
pressure hose
to gun. Tighten
securely.
3.
Connect wand to
gun. Tighten securely.
4. Place the nozzle holder onto
the panel (located on the handle
assembly) and push each nozzle
holder into place.
A07513

CARTON CONTENTS

Operation
Manual
Chemical
Hose
Engine
Manual
Spray Gun
Quick Connect Spray Wand
ASSEMBLY INSTRUCTIONS
Nozzle
Nozzle
Cleaning
Holder
Tool
Bagged Parts
Handle
5. Remove five colored quick
connect nozzles from plastic
bag and insert them into correct
grommet on the nozzle holder.
NOTE: Nozzles are color coded
to match colored nozzles on
panel.
6.
Slide the formed rubber covers
onto the handle's on-board hose
and wand storage.
7.
Add engine oil (supplied)
to engine. Refer to Engine
Owners Manual supplied by
engine manufacturer for correct
procedure.
NOTE: There will be a slight amount
of oil in the engine from factory
testing.
NOTE: The high pressure pump was
filled with oil at the factory. There is no
need to add oil at this time, see the
Maintenance section of this manual
for Maintenance information.
6- ENG
Quick
Formed
Connect
Rubber
Nozzles
Covers
Engine
Oil