Ceiling-Mounted; Powering The Camera On - Huawei VPC800 Quick Start Manual

Hd video camera
Hide thumbs Also See for VPC800:
Table of Contents

Advertisement

Ceiling-Mounted

Others

Powering the Camera On

Connect the cables and power adapter to the camera and press the power button. About 18
seconds later, video is displayed on the display device. The camera faces forward the first time
you power it on. Afterward, the camera restores to the position before its power-off each time the
camera is powered on.
If the HD-VI port of the camera is connected to a TEX0 videoconferencing endpoint or a TX
series videoconferencing endpoint, you do not need to connect the power adapter to the camera
or press the power button. When the videoconferencing endpoint is powered on, it supplies
power to the camera to power the camera on.
Purchase a bracket for inverted installation and mount the VPC800 onto
the ceiling using the bracket. The bracket must meet the following
requirements:
It is able to bear a weight of at least 10.5 kg (18.74 lb) and has a
thickness between 2 mm (0.08 in.) to 3 mm (0.12 in.).
It comes with a location pillar, which can be inserted into the location
hole of the VPC800. The distance between the screw hole on the bracket
and location pillar must be 14.5 mm (0.57 in.), which is also the distance
between the two holes on the bottom of the VPC800.
It comes with a screw hole and one or more 1/4"-20UNC screw.
When attaching the purchased bracket and VPC800, it is
recommended that you use a 1/4"-20UNC screw delivered with the
purchased bracket rather than a 1/4"-20UNC screw delivered with the
VPC800 because the length of the latter may be too long or too short to
hold up the purchased bracket.
Install the camera on a tripod (separately purchased).
7

Advertisement

Table of Contents
loading

Table of Contents