Display Displays camera model and version information and then license information (1080p or 4K) when a VPC800 is powered on. Displays settings information when a VPC800 is running properly. Displays the error code for a self-check error or PTZ rotation error when an error occurs.
If the display is thicker than 170 mm or the display is wall-mounted, the VPC800 can be installed in any possible way other than be mounted on top of the display. If the display is 170 mm or thinner, the VPC800 can be mounted on top of a display or placed horizontally.
Use the L-shaped bracket and its accessories to secure the Mounted on Top of a Display VPC800 on top of the display. The following figure shows the installation procedure.
Use the L-shaped bracket and its accessories to mount the VPC800 on Wall-Mounted the wall. Prepare the hammer drill, rechargeable battery-powered electric screwdriver, hammer, and Phillips screwdriver by yourself. Drill four holes in the wall for mounting the bracket, each with a diameter of 8 mm (0.31 in.) and depth of 35 mm (1.38 in.).
1/4"-20UNC screw delivered with the purchased bracket rather than a 1/4"-20UNC screw delivered with the VPC800 because the length of the latter may be too long or too short to hold up the purchased bracket.
Press it to confirm an operation. On the OSD configuration screen, press them to move to desired options. To learn more about the remote control, visit http://www.huawei.com and search for the TE30&TE40&TE50&TE60&TX50 Videoconferencing Endpoint V600R006C00 Administrator Guide. After finding this guide, open it and view the "Understanding the Remote Control"...
1080i 60 fps, 1080p 60 fps, 4K2Kp 30 fps, or 4K2Kp 60 fps based on the site requirements. VIDEO 4K2Kp 60 Select a video format. Only a VPC800 with a 4K license supports this function. 4K2Kp 50 4K2Kp 30 4K2Kp 25 1080p 60 Select a video format.
SELECT Mode Description 1080i 50 1080p 30 1080p 25 720p 60 720p 50 Set FLIP to ON if the camera is ceiling-mounted. FLIP To disable the video flip function, set FLIP to OFF (default value). Automatically detects the installation mode (mounted on top AUTO of a display or ceiling-mounted) of a camera and automatically enable or disable the image rotation function.
Safety Precautions Before you use the product, refer to the product vendor for version mapping information and to confirm compatibility with other videoconferencing equipment. Keep the device dry and prevent it from colliding with other objects during storage, transportation, and operations. During installation and commissioning, ensure that the camera is properly grounded, and do not insert or remove the camera video cables when the camera is powered on.
Troubleshooting Question Why can't I use PTZ to control the camera from an HD videoconferencing endpoint? Answer The serial connection between the camera and the HD videoconferencing endpoint is incorrect. The serial port of the HD videoconferencing endpoint type is set incorrectly. Question Why does the camera fail its startup diagnosis along with one of the following symptoms: 1) The camera fails to start.
Why cannot the cameras be controlled after they are connected? Answer The Huawei VPC800 camera supports the Video System Control Architecture (VISCA) protocol and cascade control. Connection method: Use a keyboard that supports the VISCA protocol to connect the cameras.