Radio - Philips AZ1203 User Manual

RADIO

Tuning to radio stations
1 Set the POWER slider to TUNER.
2 Select the wave band by using the BAND selector.
™ Display indication: the selected waveband.
3 Press SEARCH ∞ or § for approx. 1 second and then release
the button.
™ The radio automatically tunes to a station with sufficient
strength. Display indication during automatic tuning:
4 Repeat this procedure until you find a station you desire.
To tune to a weak transmitter briefly press SEARCH ∞ or § as
often as necessary for optimum reception, or until the correct
frequency is indicated in the display.
Programming radio stations (29 preset stations)
You can store up to 29 radio stations in the memory. When
tuning to a preset station, the preset number (1 to 29) is indicated
in the display.
1 Set the POWER slider to TUNER.
2 Press PROGRAM to enter the programming mode.
™ During programming,
3 Tune to a desired station with SEARCH ∞ or §, as described
earlier (see "Tuning to radio stations").
™ If the frequency is already stored in the memory, the preset
number will be displayed.
4 Press PRESET 4 or 3 to allocate a number from 1 to 29 to the
preset station.
5 Press PROGRAM to confirm the setting.
Tuning to preset stations
Press PRESET 4 or 3 until the desired preset number appears
on the display.
8
flashes on the display.
PROGRAM
Srch.
TUNER
PROGRAM
TUNER
STEREO
TUNER
FM
FM
FM