Table of Contents
Advertisement
WIRED REMOTE CONTROLLER BUTTONS
No.
Name
1
Enter/Cancel
2
6
3
Fan
4
Mode
5
Function
7
Timer
8
On/Off
4+2
3+6
2+6
Mode
4+6
1
Enter/Cancel
Enter/cancel
Function
5
Fig. 4 - Wired Remote Controller Buttons
WIRED REMOTE CONTROLLER BUTTON FUNCTIONS
Table 2—Controller Button Functions
Function selection and cancellation
Running temp. setting of the indoor unit, range: 60.8
Timer setting, range:0.5-24 hr.
Setting of the high/middle/low/auto fan speed
Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit
Switchover among the functions of Turbo/Save/Blow etc..
Timer setting
Turn on/off the indoor unit
Press together for 5s under the unit's OFF state to ENTER/CANCEL the
memory function (if the memory is set the indoor unit, after a power failure and
the power recovery, will resume it's original setting state. If not, the indoor unit
is default to OFF after a power recovery. MEMORY OFF is the default before
delivery).
Press at the same time under the unit's OFF state,
wired controller for the cooling only unit, while
controller for the cooling and heating unit.
Upon startup of the unit without malfunction or under the unit's OFF state,
press them at the same time for 5s to enter the lock state, in which case,
any other buttons will not respond. Repress them for 5s to quit the state.
If there is a preference for
and hold MODE and decrease temperature set point buttons together for 5
seconds.
2
3
4
Mode
Fan
Timer
On/Off
6
7
Function
°
°
F rather than
C (default), under the OFF state, press
3
8
°
°
°
°
F~86
F (16
C~30
C)
appears on the
appears on the wired
Advertisement
Table of Contents
