Description Of Power Button (Automatic-Manual-Off) - Baxi RC 06 Instructions Manual

In mode the symbols are shown on the display. The
boiler meets DHW and heating mode demands (frost protection function
activated).
In mode the symbol is shown on the display. The boi-
ler only meets heating mode demands (frost protection function is enable).
If is selected, neither of the two symbols ( ) ( ) is displayed. In
this mode only the frost protection function is enabled and any other deman-
ds in DHW or heating mode are not met.
1.3 DESCRIPTION OF BUTTON
(AUTOMATIC-MANUAL-OFF)
By pressing this button it is possible to set one of the following Heating
modes:
AUTO-MANUAL-OFF as describe below.
)
The Heat request depends on the type of the "Time Programs" set (COM-
FORT room temperature " " or REDUCED room temperature " "). See sec-
tion 1.6 to set the programming heating mode.
)
This function disables the "Time Programming" in Heating mode. Press the
+/- button to set the room temperature value.
)
This function disables the Heating mode and the display shows the
symbol (the frost protection is enabled).
71.09161.01 en
28