Table of Contents
Advertisement
The shower function ensures better hot water comfort, e.g. during a shower.
This function enables domestic hot water to be drawn at a lower temperature than the
nominal temperature value.
To set or modify the max. shower function temperature value, refer to section 2.3.
This function can be manually activated in the following way:
(the message
button while the ow temperature and the symbol
At the end of this time the domestic hot water temperature returns to the value of the
previously set operating mode (the symbol
To disable the function before the end of the 60 minutes, proceed as follows:
button, the display shows the message "
2.3 TEMPERATURE VALUES MODIFICATION
BY PRESSING THE
To modify the room temperature values, proceed as follows:
button to enable the
The set temperature value ashes
(factory setting = 20°C)
The set temperature value ashes
(factory setting = 18°C)
The set temperature value ashes
(factory setting = 5 °C)
The set temperature value ashes
(factory setting = 40°C)
+/-
button to exit the function.
71.09161.01
2.2 SHOWER FUNCTION
+/-
and then the button
brie y appears on the display, followed by the message
60 minutes (during this time the symbol
+/-
and then the button
button to select the required function as described in the following table:
button to modify the value of the selected function.
is no longer intermittent on the display).
BUTTON
Boiler operation in heating mode at nominal
temperature.
Boiler operation in heating mode at reduced
temperature.
Boiler operation in heating mode at room frost
protection temperature.
Boiler operation in DHW mode at DHW
temperature set.
37
ashes).
"..
en
Hide quick links:
Advertisement
Table of Contents
