Parameters Display; Information And Advanced Setting Mode; Central Heating - Baxi RC 06 Instructions Manual

4.1 INFORMATION AND ADVANCED SETTING MODE

To access the Information and Advanced Setting mode, it is necessary to press, for at
least 3 seconds, the
To escape the INFO mode brie y press the
Communications between the main board and the remote control is not imme-
diately. In some case it may happen that the command given through the remote
control takes some time depending on the type of the transferred information.
Max. heating circuit setpoint, value settable with the buttons +/-
vice versa, press the
Outside temperature (with external sensor connected).
Maximum Heating ow temperature.
Return heating temperature (unplanned).
CH temperature setpoint.
Maximum CH temperature setpoint (max. settable value).
Minimum CH temperature setpoint (min. settable value).
71.09161.01

4. PARAMETERS DISPLAY

to change the unit of measure from °C to °F and
42
button. In this mode press the
+/-
button.
.
button.
.
en