Party Function - Baxi RC 06 Instructions Manual

Press the +/-
minutes step. The period of time is settable from a minimum of 10 minutes to
a maximum of 45 days.
By pressing the +
in this case the period of time is carries out in hours from a minimum of 2 hours
to a maximum of 47 hours, with 1 hour step.
By pressing the +
in this case the period of time is carried out in days from a minimum of 2 days
to a maximum of 45 days, with 1 day step.
do not press any button after having enabled this function. By
pressing some of the remote control buttons, it is possible that the manual
function is enabled by mistake (in this case the display shows the
and that causes the "Holiday Program" function shut off . In this case it is
necessary to repeat the instructions described at the beginning of this section
to enable again the function.
This function allows the user to set a temporary room temperature value. It is
possible to change this temperature value also during the function operation.
The operating mode returns to a previews setting at the end of this period of
time.
To enable the function, proceed as follows:
display shows "
71.09161.01
buttons to set the period of the timing program with 10
button after
button after
button to set the function to "
button, the display shows the writing
") then press the +/-
, the display shows "
, the display shows "
buttons.
39
":.
":
symbol)
" (symbol
and the
the
en