Download Print this page

SoundLogic R-011M Instruction Manual page 6

Xt tailgate speaker system

Advertisement

Listening to Music using USB / SD Card Slot 
1.
Turn on the speaker. 
2.
Insert USB flash drive into the USB slot or SD card into the SD/MMC CARD Slot. Music plays automatically. 
3.
Short press the SKIP+/TUN+ button or SKIP‐/TUN‐ button to move forward or backward on your playlist. 
4.
Short press PLAY/SCAN button to Play or Pause a track. 
Note:  While  using  Bluetooth,  if  you  insert  USB  Flash  drive  or  SD  Card,  speaker  would  disconnect  the  Bluetooth 
connection and switch to USB / SD card function. You can press MODE button again, to select the Bluetooth mode. 
 
Tips!! 
1. Short press the MODE button to switch different functions of the speaker. The functions are – Bluetooth / 
USB‐SD / FM radio / AUX 1 / AUX 2. 
2. When the speaker is not in use, turn OFF the device to save the battery power. 
3. Always  use  the  adaptor  included  with  the  pack  to  charge  the  internal  battery  of  the  speaker.  Charging 
through  unauthorized  adaptor  may  damage  the  product,  and  will  terminate  all  warranty  privileges 
instantly. 
4. Do not overcharge the speaker. 
 
Do's and Don'ts 
Do not play music at excessive levels as damage to hearing and/or equipment may result. 
Do not use outdoors in wet or in damp surroundings. 
 
Listening to Music using AUX‐In 
1. Turn on the speaker. 
2. Plug the 3.5 mm Aux‐in cable (included) into the LINE IN port of the speaker for AUX 1 function or AV cable 
(not included) to the AUX IN port of the speaker for AUX 2 function respectively. And, the other end of the 
cable to the audio device (such as computer / tablet / MP3 Player etc.). 
3. Press the MODE button to AUX 1 or AUX 2 function. 
4. Select your favorite song at the source device. 
(Note: While using AUX‐In function, all functions such as playing next/previous track can be controlled only through 
your source device). 
 
Listening FM radio 
1. Turn on the speaker. 
2. Press the MODE button to radio function. 
3. Press  the  PLAY/SCAN  button  for  searching  and  recording  all  radio  stations  within  frequency  range 
87.5‐108MHz. 
4. Press the SKIP+/TUN+ or SKIP‐/TUN‐ button for listening next or previous preset radio station. 
6

Advertisement

loading

Related Products for SoundLogic R-011M

This manual is also suitable for:

Bttg-1/6357