Assembly Of The Operator And Sliding Arm Da149 To The Closing Side - Abloy DA461 Installation And Commissioning Manual

7.3

Assembly of the operator and sliding arm DA149 to the closing side

Y
Frame
depth
< 50
50-100
Y
Frame depth
Pre-setting of the spring force
12
Mounting of the operator: M6x14 and washer
L
Arm distance Minimum door
L/mm width M/mm
120
50
34
- After installation, ensure that the arm and door are properly
adjusted.
- Mount a door stop to the door open position so that wind will
not drive the door against the wall, resulting in damage.
- Tighten the holding screw.
585
M
740
670
Frame
depth
Y Length of
extension piece
48 No extension piece M8x20 +
58 10 mm (DA150/01) M8x30 +
68 20 mm (DA150/02) M8x35 +
DA104
Min 38
Mounting
of the arm
washer
washer
washer