Sanyo DC D30 Instruction Manual page 13

Programme edit recording
6
SIDE A 23 min.
Unrecorded blank
5 2
1"1
3 ~~:
H
~>
Auto reverse
4 1
Unrec&rded blank
SIDE B 23 min.
The desired selections can be rearranged and recorded on the tape
5. Repeat steps 3-4 to programme the tracks to be recorded onto side
within a designated tape length.
A.
If a track exceeding the remaining time on side A is selected, its
Example:
play time blinks on the display.
To record onto a 46-minute taDe
When the CD MEMORY switch is pressed, "SIDE A" disappears
1.
2.
3.
4.
Press the EDIT switch until "C-46" appears.
Press the CD MEMORY switch.
Select the track to be recorded by using the SKIP/SEARCH switches.
~
The remeinino time on side A is shown on the time display.
.
Press the CD MEMORY switch.
SIDE A
5 -13.00
TtWCK
EDiT
PROG. 5
and "SIDE B" appears. The remaining time on side B appears on
the time display. This and subsequent tracks are recorded on side
B.
6. Repeat steps 3-4 to programme the tracks to be recorded onto side
B.
If a track exceeding the remaining time on side B is programmed,
"Err" will appear in the display for 4 seconds.
7. Press the COMP. REC switch.
The track numbers and play time for side A are displayed.
The track numbers and play time for side B are displayed.
Recording starts automatically from the first programmed track.
Fade-out edit recording
Fade out (1O sec.)
SIDE A 30 min.
I
1
II
2
H
3
H
4
H
5
H
6
11
II 1..1
H
q>
Auto reverse
11
10
9 8
1
6
I
Fade out (10 sec.)
Record from the beginning of a track.
SIDE B 30 min.
The sound is automatically faded out at the end of sides A and B,
according to the selected tape length. When the tape reverses from side
A to B, recording continues from the beginning of the last track played.
Example:
To record onto a 60-minute tape
_ 1. Press the EDIT switch until "C-60" appears.
2. Press the TIME/FADE switch twice.
~
This shows that 5 minutes 35 seconds of track 6 will be recorded on
side A.
o
11
7.05 '+('
TRACK FADE EDIT
676910
This shows that 7 minutes 5 seconds of track
side B.
will be recorded on
3.
The track numbers and total play time for both sides are displayed.
Press the COMP. REC switch.
The tracks to be recorded onto side A are shown.
- The tracks to be recorded onto side B are shown.
Recording starts from the beginning of track 1.
'~
"FADE" blinks during fade-out (1O seconds).
The sound is also faded out when a track is interrupted at the end of
side B.
If "ENd" appears during step 2, it indicates that the disc will reach the
end before the end of the tape. In this case, the last track on the disc
will not be faded out.
No recording is made on the last 15 seconds of the tape.
-12-